Jaeger-LeCoultre presents "In The Making"

Jaeger-LeCoultre presents “In The Making”

Reading Time: 3 minutes

Paying tribute to the 180 different watchmaking skills that are gathered under one roof at its Manufacture in the Vallée de Joux, Jaeger-LeCoultre launches a new series of short films that take viewers behind the scenes as never before, revealing the passion that has driven the Maison since 1833 and paying homage to its timeless values of creativity and precision.

With each video focusing on a single skill, including rarely seen stages of the watchmaking process, In the Making is an intimate and elegiac tribute to the artisans who practise each of those skills. Taking the artisans’ own words to explain their processes, each film conveys the passion and dedication that drive them to imagine, produce, assemble and decorate fine timepieces that will last for generations. The sense of intimacy is amplified by evocative lighting, over-the-shoulder camera angles, and close-ups of the precise gestures that have been perfected through countless years of practice.

Lending equal weight to all of the skills housed within Jaeger-LeCoultre’s fully integrated Manufacture, In the Making is arranged in several chapters, corresponding to the sequence of steps required to create a fine timepiece: Design, Produce, Finish and Ornament.

DESIGN

As well as determining the aesthetics of a watch – the shape, size, style and composition of the dial, and case – design embraces all technical considerations, ranging from the development of new complications and movements to the shape of components required to perform particular functions, the overall architecture of a movement, the technical requirements of the case that must contain a given movement, and all ergonomic considerations. 

Designers sketch out ideas with pencil and paper in a process that draws on the past, present and future, and working in intense collaboration with technical designers and movement constructors; a beautiful looking design is of no use in watchmaking unless allied to engineering and technical design of the highest precision.

Jaeger-LeCoultre presents "In The Making"

PRODUCE

With a deep exploration of what are often considered the more “industrial” stages of production – the skills rarely seen and little understood by the public – In the Making reveals how the specialists who master each of these steps share the same devotion to precision and artistry, and the same passion for their craft as their colleagues in every other area of the Manufacture. At Jaeger-LeCoultre,  the production process begins with raw metal, which is cut, stamped or treated in myriad other ways, to eventually take on the forms of different components. It ends – after countless different assembly steps – with final casing up and polishing, which brings the metal to life in a magical way.

Beyond the production of new timepieces, Jaeger-LeCoultre’s in-house restoration workshop undertakes many of the same production steps to breathe new life into watches that may be 40, 60 or even 90 years old. The restoration specialists use original spare parts when available or make identical components from scratch, using original blueprints and swages (metal-stamping templates).

Jaeger-LeCoultre presents "In The Making"

FINISH

With the responsibility for bringing light and reflection to the visible part of our timepieces such as the case, bezel, lugs and crown, the polisher has the power to bring a timepiece to life in a magical way with every gesture.

In accordance with its belief that a fine watch should be beautiful not only on the outside but also in parts that are not immediately visible, Jaeger-LeCoultre attaches great importance to the fine finishing and hand decoration of watch movements. High complication watches require particular expertise, in keeping with their rarity and value. These finishing techniques range from the traditional, such as perlage, Côtes de Genève, blueing of screws, chamfering and skeletonisation, to modern finishes, such as micro-blasting. 

Enhancing the beauty of components by making the edges shine and creating a play of luminous reflections, bevelling (or anglage) is a meticulous decorative technique that involves multiple skills, from hand-cutting internal angles to multiple variations of hand-polishing with a variety of metal and wooden tools. Finishing requires impeccable mastery of every skill and gesture in order to achieve consistent angles and reflections.

ORNAMENT

Bringing together centuries-old decorative crafts such as guillochage, engraving, gem-setting and a variety of different enamelling techniques, Jaeger-LeCoultre is one of the very few watchmaking Manufactures to have a dedicated Rare Handcrafts (Métiers Rares®) atelier under its own roof. 

Complex and meticulous, grand feu enamel is a cross between illustration and chemistry – as much alchemy as art; engravers use a variety of techniques and different gestures to fashion subtle plays of light and shadows on metal surfaces to produce an almost endless variety of patterns; the gem-setter’s task is to secure precious stones to metal in a way that flatters the beauty of the gem, and watches bring the additional challenge of having already been decorated with other crafts, requiring extreme precision and delicacy on the gem-setter’s part. By working side-by-side in a dedicated atelier, these specialised artisans are better able exchange ideas and share their creative energy, while maintaining and perpetuating ancestral know-how within the Manufacture.

The Story Continues

Beginning with eight films, covering eight of the watchmaking skills, In the Making will grow over time into a fully comprehensive library as more videos are completed. The first films are Design: aesthetics and style; Research & Development; Polishing; Restoration; Bevelling; Enamelling, Engraving; and Gem-setting.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.